Human presence sensor and smart lighting with millimeter wave radar and Zigbee system – direct electrical operation, ceiling/wall mounting
1-year warranty
One-year warranty from the date you receive the product. We replace the product if a manufacturing defect is confirmed. We do not offer repairs.
Fast delivery
Delivery takes 24–48 hours after your order is actually handed to the courier. Courier handover is at 8 pm Baghdad time.
Expert technical support
Technical support on WhatsApp, Saturday–Thursday, 8 am–11 pm Baghdad time.
Contact us on WhatsApp 07760808466
The NEO radar sensor with Zigbee helps link presence to room lighting, with settings that account for ambient light levels. You can use its suitable output or create a scene that turns on a separate lamp through a compatible smart socket.
Adjust presence sensing and the ambient-light threshold to suit the installation location, then test the result in everyday use.
Choose manual or automatic output mode, or use presence status in a scene through a compatible Zigbee gateway.
| Specification | Details |
|---|---|
| Family and version | NEO Human Presence Sensor 10, Zigbee |
| Connectivity | Zigbee / IEEE 802.15.4 |
| Power supply | AC 95–250 V, 50/60 Hz |
| Stated maximum output | 2 A; not a uniform rating for every load type |
| Radar frequency | 24 GHz |
| Light-based control | Selectable ambient-light threshold |
| Output mode | Manual or automatic |
| Operating temperature | −10 to +60 °C |
When: The sensor’s status changes to a person being present within a preconfigured scene.
Action: Send an on command to a separate smart socket connected to a compatible lamp.
Isolate the power supply and verify the absence of voltage before work; app switch-off is not maintenance isolation. The output terminals are not dry contacts, and simultaneous disconnection of L and N must not be assumed. Choose a location protected from water and unsuitable moisture.
Detection may be affected by placement, movement, and obstacles. Keep independent control for essential lighting, and do not rely on the sensor alone for emergency lighting or protecting people.
Add the compatible Zigbee gateway first, then add the sensor as a sub-device in the app.
Yes. After adding the devices and testing the scene, you can configure a scene that turns on a smart socket connected to a compatible lamp when presence is detected.
Choose a location suited to the room and installation method, then test movement, sitting, and ambient light before final mounting.
