Smart human presence and motion detection ceiling sensor with mmWave radar and PIR technology, Zigbee compatible.
1-year warranty
One-year warranty from the date you receive the product. We replace the product if a manufacturing defect is confirmed. We do not offer repairs.
Fast delivery
Delivery takes 24–48 hours after your order is actually handed to the courier. Courier handover is at 8 pm Baghdad time.
Expert technical support
Technical support on WhatsApp, Saturday–Thursday, 8 am–11 pm Baghdad time.
Contact us on WhatsApp 07760808466
Use MOES ZSS-QY-HP-MS as an input to scenes combining presence and ambient light, with a Zigbee gateway and compatible smart devices. The ceiling sensor detects movement and small movements using 5.8 GHz radar; this is the sensing frequency, while its home-system connection is Zigbee.
The sensor supports detecting small movements associated with human presence as well as movement. For seated use, the manual explains the importance of having moving body parts face the sensor; adjust its position and test the actual seating areas.
Use ambient-light measurement within 0–2000 lux together with presence status to turn on lighting through a compatible scene when the room is dark according to your chosen threshold.
Adjust sensitivity, detection distance and delay gradually using the options available in your version, then test presence and movement in the areas of use.
| Specification | Details |
|---|---|
| Model | ZSS-QY-HP-MS; Zigbee version of ZSS-QY-HP |
| Power supply | AC 100–250V |
| Connection | Zigbee 3.0 via a compatible gateway |
| Documented sensing technology | Microwave radar at 5.8GHz |
| Ambient-light measurement | 0–2000 lux |
| Operating temperature | From -20 to +70°C |
| Installation | Recessed in the ceiling; opening diameter 80 mm |
| Dimensions | Diameter 93 mm × depth 30 mm |
When: The sensor reports a person present with a light reading below the threshold you select in the scene.
Action: Turn on a compatible smart lamp or switch through the automation rule you have configured.
A qualified technician must make the connections according to the unit’s instructions after isolating the supply and verifying the absence of voltage, without guessing terminals or relying on wire colours. Do not connect a lighting or air-conditioning load directly to the sensor.
Results are affected by installation height, body direction, small movements, reflections, sensitivity, distance and delay; detecting every stationary person or keeping the lights on in every posture is not guaranteed. Use it for convenience automation, not as a medical monitor, fall detector or replacement for an approved alarm.
Test it in the actual seating positions, making sure moving body parts face the sensor, and gradually adjust the available sensitivity, distance and delay settings. Results depend on small movements and the surroundings; this is not a guarantee of detecting complete stillness.
