Wi-Fi Infrared Sensor Switch — Non-contact Wave-to-Open Smart Life/Tuya App
اسود
17,000 IQD
Skip to product information
2 left
Wi-Fi Infrared Sensor Switch — Non-contact Wave-to-Open Smart Life/Tuya App
17,000 IQD
Shipping calculated at checkout.
Wi-Fi Infrared Sensor Switch — Touchless Hand-Wave Operation
Practical lighting control via hand-waving, with management from your phone via the Smart Life app and support for voice control.
Touchless Operation 2.4GHz Wi-Fi Tempered Glass + PC 10cm Sensing 100–240V
Safety Warning: Operates on household electricity (AC 100–240V). Installation by an electrician is recommended, with the circuit breaker disconnected before wiring.
Features
- On/Off wave control via IR sensor.
- Phone control via the Smart Life app.
- Voice control support: Alexa, Google Home, Tmall Genie, and Yandex.
- Supports Inching, Countdown, Schedule, Circulate, and Inching functions.
Wiring: Works in two ways: with an N wire or without an N wire.
Without N: The included capacitor must be installed inside the product box according to the wiring diagram.
Without N: The included capacitor must be installed inside the product box according to the wiring diagram.
Quick Specs
Model
KG080
Wi-Fi
2.4G WiFi
Input Voltage
100–240V 50/60Hz
Power
400W(L) / 600W(N+L)
Sensing Distance
10cm
Button Lifespan
100,000
Technical Specifications
| Item | Details |
|---|---|
| Product Name | WiFi Infrared Sensor Switch |
| Model | KG080 |
| Input Voltage | 100–240V 50Hz/60Hz |
| Rated Power | 400W (L) / 600W (N+L) |
| Button Lifespan | 100,000 presses |
| Sensing Distance | 10 cm |
| Operating Temperature | -20°C to 50°C |
| Wireless Standard | 2.4G WiFi |
| Materials | PC + Tempered Glass Interface |
| Dimensions | 8.6 × 8.6 × 3.5 cm |
| Weight | 121g (Net) / 184g (Gross) |
| Wiring | With or without N |
| Capacitor | When wiring without N: Install the included capacitor as per the wiring diagram |
| Compatibility | Smart Life + Alexa + Google Home + Tmall Genie + Yandex |
How to add to the Smart Life app
- Enable Wi-Fi and Bluetooth on your phone.
- After turning on the power: The blue indicator flashes rapidly to enter pairing mode.
- If it does not flash: Place your palm at a distance of 10 cm for 10 seconds until the indicator starts flashing.
- Open Smart Life, press (+) to add a device, then press Add to complete the pairing.
Note: Pairing is done via 2.4GHz Wi-Fi.
FAQs
Does it work with 5GHz Wi-Fi?
No, it operates on 2.4GHz.
Can it be installed without an N wire?
Yes, in which case the included capacitor must be installed according to the wiring diagram.
