Zigbee Smart Blind Unit – Single Channel (1CH) | Works with Smart Life App

Turn your blind/roller shutter motor into a smart system: control it from your phone, schedule schedules, create scenes, and fully sync with your wall switch. This page is for the 1CH (single motor) version . Some tutorial images may appear for the Wi-Fi or 2CH versions for illustrative purposes only.

Key advantages

• Control via the Smart Life app on iOS and Android, with device sharing and creation of groups/scenes .
• It supports integration with Amazon Alexa and Google Assistant via the Zigbee app/portal.
• Synchronous manual control from the wall switch + the ability to reverse the motor direction from the device settings.
• Schedule/timer to open the curtain in the morning and close it at night, with automatic reconnection when the network/power is restored.

Compatibility and requirements

• An internet-connected Zigbee Gateway is required to add the device to the application.
• It requires a neutral (N) wire in the switch box.
• Mechanical rocker switches are recommended for manual control (S1/S2).
• Check that the curtain motor current does not exceed 3A (for one channel 1CH).

Quick Delivery Scheme (1CH)

• Power: L (phase) and N (neutral) are connected from the source to the unit.
• The motor (M): It outputs both directions to L1 (up) and L2 (down).
• Wall switch: Control terminals on S1 and S2 .
• If the curtain works in reverse: Activate the Motor Reversal option from the device settings in the application.

Technical specifications

Composition and pairing

1. Disconnect the power supply and then connect as shown in the diagram (L/N for the source, L1/L2 for the motor, S1/S2 for the switch).
2. Reconnect the power, then press the RESET button for about 10 seconds or turn the switch on/off 5 times until the indicator flashes to enter pairing mode.
3. Open the Smart Life app ← Select Zigbee gateway ← Add device and follow the instructions until it appears as a “Curtain” model.

Frequently Asked Questions

Is the orientation not responding correctly? Use the Reverse Orientation option from your device settings.

Is your internet/router down? Manual switch control remains available, and the connection is automatically restored when the network is back up.

Safety alerts

• The installation must be carried out by a qualified electrician and in accordance with local regulations.
• Keep the unit away from sources of strong signal interference and metals/concrete as much as possible to improve range.
• Do not disassemble or modify the unit, and keep it away from water and high heat.

note

This page is for the 1CH Zigbee version. Some tutorial images may show the Wi-Fi or 2CH version for illustrative purposes only.